LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2007 >> Murano SE >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P1217 To P2A03 >> DTC P1217 Engine Over Temperature >> Overall Function Check >> With Consult-II

With Consult-II

  1. Check the coolant level in the reservoir tank and radiator.

    Allow engine to cool before checking coolant level. 

    If the coolant level in the reservoir tank and/or radiator is below the proper range, skip the following steps and go to , "DIAGNOSTIC PROCEDURE ".

  2. Confirm whether customer filled the coolant or not. If customer filled the coolant, skip the following steps and go to , "DIAGNOSTIC PROCEDURE ".
  3. Turn ignition switch ON.
    Fig 1: Identifying Coolant Level In Reservoir Tank
    G04875329Courtesy of NISSAN NORTH AMERICA, INC.
  4. Perform "COOLING FAN" in "ACTIVE TEST" mode with CONSULT-II.
  5. If the results are NG, go to , "DIAGNOSTIC PROCEDURE ".
    Fig 2: CONSULT-II Display - ACTIVE TEST
    G04900600Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals