LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2007 >> Murano SE >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0448 To P1212 >> DTC P0451 EVAP Control System Pressure Sensor >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

  1. Turn ignition switch OFF and wait at least 10 seconds.
  2. Turn ignition switch ON and select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and wait at least 40 seconds.

    If 1st trip DTC is detected, go to , "DIAGNOSTIC PROCEDURE ".

    Fig 1: CONSULT-II Display - DATA MONITOR
    G04900504Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals