LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2007 >> Maxima SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 723 (Engine Control System - Introduction) >> Basic Service Procedure >> Fuel Pressure Check >> Fuel Pressure Release >> With CONSULT-II

With CONSULT-II

WARNING: This page is about a different car, the 2006 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Perform "FUEL PRESSURE RELEASE" in "WORK SUPPORT" mode with CONSULT-II.
  3. Start engine.
  4. After engine stalls, crank it 2 or 3 times to release all fuel pressure.
  5. Turn ignition switch OFF.
    Fig 1: CONSULT-II Display - FUEL PRESSURE RELEASE
    G04160122Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals