Removal and Installation: Removal

Push the knob cover downward and pull the lock pin out of the selector lever knob as shown.

Fig 1: Identifying Knob Cover
Courtesy of NISSAN MOTOR CO., U.S.A.
Pull the selector lever knob (1) and knob cover (2) upward to remove them.

Fig 2: Identifying Lever Knob And Knob Cover
Courtesy of NISSAN MOTOR CO., U.S.A.
Pull up on the CVT finisher to release the clips and remove it.
Remove the front center console.
- Refer to "FRONT CENTER CONSOLE ".
Remove the lock plate and disconnect the control cable from the control device.

Fig 3: Identifying Control Cable And Control Device Harness Connector
Courtesy of NISSAN MOTOR CO., U.S.A.
Disconnect the control device harness connector.
Remove the control device assembly.
- ←: Bolt (4)
Fig 4: Identifying Control Device Assembly Bolts
Courtesy of NISSAN MOTOR CO., U.S.A.