LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2007 >> Maxima SE >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transmission (CVT) >> DTC P0710 CVT Fluid Temperature Sensor Circuit >> Component Inspection >> CVT Fluid Temperature Sensor

CVT Fluid Temperature Sensor

  1. Turn ignition switch OFF.
  2. Disconnect CVT unit harness connector.
  3. Check resistance between CVT unit harness connector terminals.
    CVT FLUID TEMPERATURE SENSOR

    Name Connector Terminal Temperature °C (°F) Resistance (Approx.)
    CVT fluid temperature sensor F30 17 - 19 20 (68) 6.5 kΩ
    80 (176) 0.9 kΩ
    Fig 1: Checking Resistance Between CVT Unit Harness Connector Terminals
    G04916072Courtesy of NISSAN MOTOR CO., U.S.A.
  4. If NG, replace the transaxle assembly. Refer to "REMOVAL AND INSTALLATION ".
scientia non olet · About LEMON Manuals