LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2007 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 31 (Security Control System (Hybrid)) >> Intelligent Key System >> Component Diagnosis >> B261A Push-Button Ignition Switch >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. PERFORM DTC CONFIRMATION PROCEDURE
    1. Press the push-button ignition switch under the following conditions and wait for at least 1 second.
      • ECVT selector lever is in the P or N position
      • Do not depress brake pedal.
    2. Check "Self diagnostic result" with CONSULT-III.

    Is DTC detected? 

    YES: Refer to "DIAGNOSIS PROCEDURE ".

    NO: INSPECTION END

scientia non olet · About LEMON Manuals