LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2007 >> 350Z 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Engine Control System - Introduction) >> Basic Service Procedure >> Exhaust Valve Timing Control Learning (M/T Models) >> Operation Procedure >> With CONSULT-II

With CONSULT-II

WARNING: This page is about a different car, the 2006 Nissan 350Z. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start engine and warm it up to normal operation temperature.
  2. Set shift lever in neutral position and confirm that following electrical or mechanical loads are not applied.
    • Headlamp switch is OFF
    • Air conditioner switch is OFF
    • Rear defogger switch is OFF
    • Steering wheel is in the straight-ahead position, etc
  3. Keep the engine speed between 1, 800 and 2, 000 RPM.
  4. Select "EXH V/T CONTROL LEARN" in "WORK SUPPORT" mode with CONSULT-II.
    Fig 1: CONSULT-II DISPLAY - EXH V/T CONTROL LEARN
    G04080366Courtesy of NISSAN NORTH AMERICA, INC.
  5. Touch "START" and wait 20 seconds.
  6. Make sure that "CMPLT" is displayed on CONSULT-II screen.

    Learning completed : CMPLT 

    Learning not yet : YET 

    Fig 2: CONSULT-II DISPLAY - CMPLT
    G04080367Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals