LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2006 >> Xterra Off Road, RWD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component And System Testing >> ASCD Brake Switch >> Component Inspection >> ASCD Brake Switch

ASCD Brake Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD brake switch harness connector.
  3. Check harness continuity between ASCD brake switch terminals 1 and 2 under the following conditions.
CONTINUITY REFERENCE

Condition Continuity
When brake pedal: Fully released. Should exist.
When brake pedal: Slightly depressed. Should not exist.

If NG, adjust ASCD brake switch installation, refer to "BRAKE PEDAL ", and perform step 3 again.

Fig 1: Identifying Continuity Between Terminals No. 1 & 2
G04101963Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals