Stop Lamp Switch

Disconnect stop lamp switch harness connector.

Fig 1: Disconnecting Stop Lamp Switch Harness Connector
Courtesy of NISSAN MOTOR CO., U.S.A.
Check continuity between stop lamp switch terminals 1 and 2 under the following conditions.

Fig 2: Checking Continuity Between Harness Connector terminals 1 And 2
Courtesy of NISSAN MOTOR CO., U.S.A.

CONDITION CONTINUITY CHART

Conditions	Continuity
Brake pedal: Fully released	Should not exist.
Brake pedal: Slightly depressed	Should exist.

If NG, adjust brake pedal installation, refer to "BRAKE PEDAL AND BRACKET ", and perform step 2 again.