Removal and Installation: Installation: Notes

Installation is in the reverse order of removal.

Tightening Intake Manifold Bolts and Nuts 

• Install the intake manifold bolts and nuts in the numerical order of the tightening sequence as shown.
  CAUTION: After tightening No. 5, retighten the No. 1 mounting bolt to specification.

Fig 1: Identifying Tightening Sequence Of Intake Manifold Bolts And Nuts

Courtesy of NISSAN MOTOR CO., U.S.A.

Tightening Intake Manifold Collector Bolts and Nuts 

• Tighten in numerical order as shown.
  CAUTION: After tightening No. 7, retighten the No. 1 mounting bolt to specification.

Fig 2: Identifying Tightening Sequence Of Intake Manifold Collector Bolts And Nuts

Courtesy of NISSAN MOTOR CO., U.S.A.

Installation of Electric Throttle Control Actuator: 

• Tighten the mounting bolts of electric throttle control actuator equally and diagonally in several steps.
• After installation perform procedure in "INSPECTION AFTER INSTALLATION ".