System Description: Power

Power is supplied at all times:

through 30A fusible link (letter d , located in the fuse and fusible link box)
to sunroof motor assembly terminal 5.

The power circuit is protected by the circuit breaker. The sunroof motor assembly is grounded through body ground R5.

NOTE: When the battery or sunroof motor harness connector is disconnected during service, the sunroof will not operate properly.

Procedure for resetting motor memory:

From any sunroof position (full open, partially open, closed, partially vented, and vented), push and hold the button in the forward position until the sunroof vent is in the full up position. This resets the sunroof motor memory and the sunroof will operate correctly.