Horn Reminder Check

CHECK HORN
Check if horn sounds with horn switch.

Does horn operate?

Yes: GO TO 2.

No: Check horn circuit.
CHECK HORN REMINDER OPERATION
With CONSULT-II
1. Select "ACTIVE TEST" in "MULTI REMOTE ENT" with CONSULT-II.
2. Select "MULTI REM HRN" and touch "ON".
  
  Fig 1: CONSULT-II Display - Horn
  Courtesy of NISSAN MOTOR CO., U.S.A.
NOTE: If CONSULT-II is not available, skip this procedure and go to the next step.

OK or NG

OK: Horn reminder operation is OK.

NG: GO TO 3.
CHECK HORN REMINDER OPERATION
1. Disconnect smart entrance control unit harness connector.
2. Apply ground to smart entrance control unit harness connector terminal 19.
  
  Fig 2: Checking Horn Reminder Operation
  Courtesy of NISSAN MOTOR CO., U.S.A.
  
  Refer to "FIG. 3 ".
Does horn sound?

Yes: Replace smart entrance control unit.

No: Check harness for open or short between smart entrance control unit and horn relay.