Shift Fork

Check if the width of the shift fork hook (sliding area with coupling sleeve) is within specification, as shown.

Fig 1: Checking Shift Fork Hook

G04192774

Courtesy of NISSAN MOTOR CO., U.S.A.

Shift Fork

SHIFT FORK SPECIFICATIONS

Item	One-side wear specification	Sliding width of new part
1st & 2nd	0.2 mm (0.008 in)	7.80 - 7.93 mm (0.3071 - 0.3122 in)
3rd & 4th	0.2 mm (0.008 in)	7.80 - 7.93 mm (0.3071 - 0.3122 in)
5th & 6th	0.2 mm (0.008 in)	6.10 - 6.23 mm (0.2402 - 0.2453 in)
Reverse	0.2 mm (0.008 in)	12.80 - 12.93 mm (0.5039 - 0.5091 in)