LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2006 >> Sentra Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Automatic Transmission - Introduction (Re4F04B)) >> Re4F04B >> Preparation >> Commercial Service Tools

Commercial Service Tools

WARNING: This page is about a different variant/trim than selected.
COMMERCIAL SERVICE TOOLS SPECIFICATIONS

Tool name Description
Puller
G04076026Courtesy of NISSAN MOTOR CO., U.S.A.
  • Removing idler gear bearing inner race
  • Removing and installing band servo piston snap ring
Puller
G04193640Courtesy of NISSAN MOTOR CO., U.S.A.
  • Removing reduction gear bearing inner race
  1. 60 mm (2.36 in) dia  .
  2. 35 mm (1.38 in) dia  .
Drift
G04193641Courtesy of NISSAN MOTOR CO., U.S.A.
  • Installing needle bearing on bearing retainer
  1. 36 mm (1.42 in) dia  .
Drift
G04193642Courtesy of NISSAN MOTOR CO., U.S.A.
  • Removing needle bearing from bearing retainer
  1. 33.5 mm (1.319 in) dia  .
Drift
G04193643Courtesy of NISSAN MOTOR CO., U.S.A.
  • Installing differential side bearing outer race (RH side)
  1. 75 mm (2.95 in) dia  .
scientia non olet · About LEMON Manuals