CONSULT-II Reference Value in Data Monitor Mode

Specification data are reference values.

CONSULT-II REFERENCE VALUE CHART

MONITOR ITEM	CONDITION	SPECIFICATION
HO2S2 HTR (B1)	Engine speed: Below 3, 600 rpm after the following conditions are met. Engine: After warming up Keeping the engine speed between 3, 500 and 4, 000 rpm for 1 minute and at idle for 1 minute under no load.	ON
Engine speed: Above 3, 600 rpm	OFF

MONITOR ITEM

CONDITION

SPECIFICATION

HO2S2 HTR (B1)

Engine: After warming up
Keeping the engine speed between 3, 500 and 4, 000 rpm for 1 minute and at idle for 1 minute under no load.

OFF