Checking of A/T Position

With the selector lever in the "P" position, turn the ignition switch to the ON position with the engine OFF. Confirm that the following conditions apply.

• The selector lever can be shifted from the "P" position when the brake pedal is depressed.
• The selector lever stops at each position with the feel of engagement when it is moved through all the positions.
• There is no excessive effort, sticking, noise or rattle.
• The actual position of the selector lever matches the position shown by the shift position indicator and the A/T body.
• The back-up lamps illuminate only when the selector lever is placed in the "R" position.
• The back-up lamps do not illuminate when the selector lever is pushed against the "R" position when in the "P" or "N" position.
• The engine can only be started with the selector lever in the "P" and "N" positions.
• The A/T is locked completely when in the "P" position.