Transfer Control Unit Terminals And Reference Value
Data are reference value and are measured between each terminal and ground.
TRANSFER CONTROL UNIT TERMINALS AND REFERENCE VALUE
| Terminal | Wire color | Item | Condition | Data (Approx.) | |
|---|---|---|---|---|---|
| 14 | G | 4WD shift switch (2WD) | Ignition switch: ON | 4WD shift switch: 2WD | Battery voltage |
| 4WD shift switch: 4H and 4LO | 0V | ||||
| 15 | O | 4WD shift switch (4H) | 4WD shift switch: 4H | Battery voltage | |
| 4WD shift switch: 2WD and 4LO | 0V | ||||
| 16 | W | 4WD shift switch (4LO) | 4WD shift switch: 4LO | Battery voltage | |
| 4WD shift switch: 2WD and 4H | 0V | ||||
CAUTION:
When using a circuit tester to measure voltage for inspection, be sure not to extend forcibly any connector terminals.