LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2006 >> Murano SL, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P1217 To P2A03 >> DTC P1225 TP Sensor >> DTC Confirmation Procedure >> With CONSULT-II

With CONSULT-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Turn ignition switch OFF, wait at least 10 seconds.
  4. Turn ignition switch ON.
  5. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE "
    Fig 1: CONSULT-II Display - Data Monitor
    G04216381Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals