LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2006 >> Maxima SL >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P1211 To P2A03 >> DTC P1572 ASCD Brake Switch >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

  1. Start engine (TCS switch or VDC switch OFF).
  2. Select "DATA MONITOR" mode with CONSULT-II.
    3. Fig 1: CONSULT-II Display - Data Monitor
    G04160723Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Press CRUISE switch and make sure that CRUISE indicator lights up.
  4. Drive the vehicle for at least 5 consecutive seconds under the following condition.
    CONDITION REFERENCE

    VHCL SPEED SE More than 30 km/h (19 MPH)
    Shift lever Suitable position

    If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".

    If DTC is not detected, go to the following step.

  5. Drive the vehicle for at least 5 consecutive seconds under the following condition.
    CONDITION REFERENCE

    VHCL SPEED SE More than 30 km/h (19 MPH)
    Shift lever Suitable position
    Driving location Depress the brake pedal for more than 5 seconds so as not to come off from the above-mentioned vehicle speed.
  6. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
scientia non olet · About LEMON Manuals