LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2006 >> Armada LE, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Transfer Case >> Trouble Diagnosis For System >> Neutral-4LO Switch >> Component Inspection

Component Inspection

  1. Turn ignition switch "OFF". (Stay for at least 5 seconds.)
  2. Disconnect neutral-4LO switch harness connector.
  3. Remove neutral-4LO switch. Refer to "LOCATION OF ELECTRICAL PARTS ".
  4. Push and release neutral-4LO switch and check continuity between neutral-4LO switch terminals 12 and 13.
    TERMINAL CONTINUITY REFERENCE

    Terminal Condition Continuity
    12 - 13 Push neutral-4LO switch Yes
    Release neutral-4LO switch No
  5. If NG, replace the neutral-4LO switch. Refer to "LOCATION OF ELECTRICAL PARTS ".
Fig 1: Checking Continuity Between Neutral-4Lo Switch Terminals 12 And 13
G04210893Courtesy of NISSAN MOTOR CO., U.S.A.