Special Service Tools

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

SPECIAL SERVICE TOOLS DESCRIPTION

Tool number (Kent-Moore No.) Tool name		Description
KV40104000 (-) Flange wrench	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing self-lock nut Installing self-lock nut a: 85 mm (3.35 in) b: 65 mm (2.56 in)
KV381054S0 (J-34286) Puller	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing front oil seal Removing rear oil seal Removing metal bushing
KV38100500 (-) Drift	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing front oil seal a: 80 mm (3.15 in) dia .b: 60 mm (2.36 in) dia .
ST30720000 (J-25405) Drift	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing rear oil seal Installing mainshaft front bearing and oil seal a: 77 mm (3.03 in) dia .b: 55.5 mm (2.185 in) dia .
KV40105310 (-) Drift	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing dust cover a: 89 mm (3.50 in) dia .b: 80.7 mm (3.17 in) dia .
ST22360002 (J-25679-01) Drift	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing side oil seal a: 23 mm (0.91 in) dia .b: 32 mm (1.26 in) dia .
ST35300000 (-) Drift	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing sun gear assembly and planetary carrier assembly Removing carrier bearing Installing metal bushing a: 59 mm (2.32 in) dia .b: 45 mm (1.77 in) dia .
ST33200000 (J-26082) Drift	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing mainshaft front bearing Installing sun gear assembly and planetary carrier assembly Installing mainshaft front bearing and oil seal a: 74.5 mm (2.933 in) dia .b: 62.5 mm (2.461 in) dia .
ST30031000 (-) Puller	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing carrier bearing Removing front drive shaft front bearing Removing front drive shaft rear bearing a: 90 mm (3.54 in) dia .b: 50 mm (1.97 in) dia .
ST33710000 (-) Drift	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing needle bearing Removing metal bushing a: 24 mm (0.94 in) dia .b: 89 mm (3.5 in) c: 30 mm (1.18 in) dia .
ST35325000 (-) Drift bar	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing metal bushing a: 215 mm (8.46 in) b: 25 mm (0.98 in) dia .c: M12 x 1.5P
ST33052000 (-) Adapter	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing front drive shaft front bearing Removing front drive shaft rear bearing Installing mainshaft a: 28 mm (1.10 in) dia .b: 22 mm (0.87 in) dia .
ST22452000 (J-34335) Drift	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing press flange snap ring Installing press flange snap ring a: 45 mm (1.77 in) dia .b: 36 mm (1.42 in) dia .c: 400 mm (15.76 in) dia .
ST30911000 (-) Puller	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing press flange snap ring Installing press flange snap ring Installing mainshaft Installing carrier bearing a: 98 mm (3.86 in) dia .b: 40.5 mm (1.594 in) dia .
KV31103300 (-) Drift	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing press flange snap ring Installing press flange snap ring Installing carrier bearing a: 76.3 mm (3.004 in) dia .b: 130 mm (5.12 in)
KV38100300 (J-25523) Drift	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing mainshaft rear bearing a: 54 mm (2.13 in) dia .b: 46 mm (1.81 in) dia .c: 32 mm (1.26 in) dia .
ST15310000 (J-25640-B) Drift	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing mainshaft rear bearing a: 96 mm (3.78 in) dia .b: 84 mm (3.31 in) dia .
KV40100621 (J-25273) Drift	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing front drive shaft front bearing Installing front drive shaft rear bearing a: 76 mm (2.99 in) dia .b: 69 mm (2.72 in) dia .
ST30032000 (J-26010-01) Base	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing front drive shaft front bearing Installing front drive shaft rear bearing a: 38 mm (1.50 in) dia .b: 80 mm (3.15 in) dia .
ST33220000 (-) Drift	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing needle bearing a: 37 mm (1.46 in) dia .b: 31 mm (1.22 in) dia .b: 22 mm (0.87 in) dia .