LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2006 >> Altima SE-R, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System >> TCS/Abs >> Trouble Diagnosis >> Malfunction Code Chart (Without CONSULT-II)

Malfunction Code Chart (Without CONSULT-II)

MALFUNCTION CODE CHART

Code No. (No. of LED flashes) Malfunctioning part
12 Self-diagnosis could not detect any malfunctions.
18  Sensor rotor malfunction
21, 22  Front right sensor
25, 26  Front left sensor
31, 32  Rear right sensor
35, 36  Rear left sensor
41  Actuator front right outlet solenoid valve
42  Actuator front right inlet solenoid valve
45  Actuator front left outlet solenoid valve
46  Actuator front left inlet solenoid valve
51  Actuator rear right outlet solenoid valve
52  Actuator rear right inlet solenoid valve
55  Actuator rear left outlet solenoid valve
56  Actuator rear left inlet solenoid valve
57 (1) Power supply (Abnormal voltage)
61  Actuator motor or motor relay
63  Solenoid valve relay
71  Control unit
77  CAN communication circuit
(CAN initialize, Bus-off, Receive)
83  CAN ATMSG1 receive timeout
84  CAN TRQDNINH fault
86  CAN ETCOK fault
87  CAN FCOK fault
88  CAN CANOK fault
(1) Under voltage that is too low, the control unit will disable the ABS. It does not set the ABS in fail-safe condition. Instead, the ABS becomes a conventional brake system. After the power supply has resumed, the warning lamp goes off, making it possible for the ABS to be re-engaged.