LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2006 >> Altima SE-R, Automatic >> Repair and Diagnosis >> Steering >> Power Steering System >> Power Steering Oil Pump >> Disassembly and Assembly >> Disassembly

Disassembly and Assembly: Disassembly

CAUTION:
  • Parts which can be disassembled are strictly limited. Never disassemble parts other than those specified.
  • Disassemble in as clean a place as possible.
  • Clean your hands before disassembly.
  • Do not use rags; use nylon cloths or paper towels.
  • Follow the procedures and cautions .
  • When disassembling and reassembling, do not let foreign matter enter or contact the parts.
  1. Remove snap ring, then draw drive shaft out using press. Be careful not to drop drive shaft.
    Fig 1: Drawing Drive Shaft Out Using Press
    G04169925Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Remove oil seal using a flat blade screwdriver as shown. Be careful not to damage front housing.
    Fig 2: Removing Oil Seal Using Flat Blade Screwdriver
    G04169926Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Remove connector and flow control valve with spring. Be careful not to drop flow control valve.
    Fig 3: Removing Connector And Flow Control Valve With Spring
    G04169927Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Inspect all of the power steering oil pump components, and repair or replace as necessary. Refer to , "INSPECTION AFTER DISASSEMBLY ".
scientia non olet · About LEMON Manuals