LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2006 >> Altima SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 158 (Engine Control System - Qr25DE) >> DTC P1229: Sensor Power Supply >> With Consult-II >> Notes

With Consult-II: Notes

WARNING: This page is about a different car, the 2005 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and let it idle for 1 second.
  4. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
    Fig 1: Display - DATA MONITOR Mode With CONSULT-II
    G02525338Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals