LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2006 >> 350Z 2D Convertible, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component And System Testing >> ASCD Brake Switch >> Component Inspection >> ASCD Clutch Switch (M/T Models)

ASCD Clutch Switch (M/T Models)

  1. Turn ignition switch OFF.
  2. Disconnect ASCD clutch switch harness connector.
  3. Check continuity between ASCD clutch switch terminals 3 and 4 under the following conditions.
    CONTINUITY REFERENCE

    Condition Continuity
    Clutch pedal: Fully released Should exist
    Clutch pedal: Slightly depressed Should not exist
    Fig 1: Checking Continuity Between Harness Connector terminals 1 And 2
    G04080991Courtesy of NISSAN NORTH AMERICA, INC.

    If NG, adjust ASCD clutch switch installation, Refer to "CLUTCH PEDAL ", and perform step  3 again.

scientia non olet · About LEMON Manuals