LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2005 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Power Supply, Ground & Circuit Elements) >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> System Description >> Systems Controlled By IPDM E/R

Systems Controlled By IPDM E/R

WARNING: This page is about a different car, the 2007 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lamp control

    Using CAN communication lines, it receives signals from the BCM and controls the following lamps:

    • Headlamps (High, Low)
    • Parking lamps
    • Tail and license plate lamps
    • Front fog lamps
  2. Wiper control

    Using CAN communication lines, it receives signals from the BCM and controls the front wipers.

  3. Rear window defogger relay control

    Using CAN communication lines, it receives signals from the BCM and controls the rear window defogger relay.

  4. A/C compressor control

    Using CAN communication lines, it receives signals from the ECM and controls the A/C compressor (magnet clutch).

  5. Starter control

    Using CAN communication lines, it receives signals from the BCM and controls the starter relay.

  6. Cooling fan control

    Using CAN communication lines, it receives signals from the ECM and controls the cooling fan relays.

  7. Horn control

    Using CAN communication lines, it receives signals from the BCM and controls the horn relay.

  8. Daytime light system control (Canada only)

    Using CAN communication lines, it receives signals from the BCM and controls the daytime light relay.