Without Abs Or CVT

WARNING: This page is about a different car, the 2007 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

CHECK VEHICLE SPEED SENSOR CIRCUITS

Remove vehicle speed sensor.
Turn ignition switch ON.

Rotate vehicle speed sensor while checking voltage between combination meter harness connector M24 terminals 6 and 7.

CONNECTOR TERMINAL VOLTAGE SPECIFICATION

Terminals				Voltage (Approx.)
(+)		(-)
Connector	Terminal	Connector	Terminal
M24	7	M24	6	0.5

Fig 1: Checking Voltage Between Combination Meter Harness Connector M24 Terminals 6 And 7

OK or NG

OK: Replace combination meter. Refer to "COMBINATION METER ".

NG: GO TO 2.

CHECK VEHICLE SPEED SENSOR

Turn ignition switch OFF.
Disconnect vehicle speed sensor connector.

Check resistance between vehicle speed sensor terminals 1 and 2.

CONNECTOR TERMINAL RESISTANCE SPECIFICATION

Terminals				Resistance value (Approx.)
(+)		(-)
Component	Terminal	Component	Terminal
Vehicle speed sensor	1	Vehicle speed sensor	2	250Ω

Fig 2: Checking Resistance Between Vehicle Speed Sensor Terminals 1 And 2

OK or NG

OK: Check harness or connector between combination meter and vehicle speed sensor.

NG: Replace vehicle speed sensor.