LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2005 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Body, Lock & Security System) >> Trunk Lid >> Trunk Lid Striker >> Removal

Trunk Lid Striker: Removal

WARNING: This page is about a different car, the 2007 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the trunk rear plate and trunk rear finisher. Refer to "TRUNK ROOM TRIM & TRUNK LID FINISHER ".
  2. Remove the bolts, disconnect the electrical connector and remove the trunk lock actuator.
  3. Remove the bolt and disconnect the trunk lid release cable.
  4. Remove the bolts (a) and the trunk lid striker (1).
    Fig 1: Identifying Trunk Lid Striker And Bolts
    G04927740