"P-SHIFT" Warning Lamp Check

WARNING: This page is about a different car, the 2007 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

CHECK WARNING LAMP OPERATION
With CONSULT-III
- Check "INDICATOR" in "ACTIVE TEST" mode with CONSULT-III.
- Select "KNOB ON".
"P-SHIFT" warning lamp should illuminate.

Without CONSULT-III
1. Turn ignition switch OFF.
2. While monitoring the combination meter warning lamps, turn ignition switch ON. "P-SHIFT" warning lamp should illuminate for 1 second to perform a bulb check.
OK or NG

OK: Inspection end.

NG: Check combination meter. Refer to "COMBINATION METERS ".