LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2005 >> Sentra SE-R >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS U1000 To P0335 (Qr25DE) >> DTC P0327, P0328: KS >> Component Inspection >> Knock Sensor

Knock Sensor

Check resistance between knock sensor terminal 1 and ground.

NOTE: It is necessary to use an ohmmeter which can measure more than 10 M ohms.
  1. Resistance: Approximately 530 - 590 k ohms [at 20°C (68°F)]
    2. Fig 1: Checking Resistance Between Knock Sensor Terminal 1 And Ground
    G02451096Courtesy of NISSAN MOTOR CO., U.S.A.
CAUTION: Do not use any knock sensors that have been dropped or physically damaged. Use only new ones.
scientia non olet · About LEMON Manuals