Horn Reminder Check

Check if horn sounds with horn switch.

Does horn operate? 

• Yes: GO TO 2.
• No: Check horn circuit.

With CONSULT-II 

1. Select "ACTIVE TEST" in "MULTI REMOTE ENT" with CONSULT-II.
2. Select "MULTI REM HRN" and touch "ON".
   Fig 1: Identifying "MULTI REM HRN"

   Courtesy of NISSAN MOTOR CO., U.S.A.
   NOTE: If CONSULT-II is not available, skip this procedure and go to the next step.

OK or NG 

• OK: Horn reminder operation is OK.
• NG: GO TO 3.

1. Disconnect smart entrance control unit harness connector.
2. Apply ground to smart entrance control unit harness connector terminal 19.
   Fig 2: Applying Ground To Smart Entrance Control Unit Harness Connector Terminal 19

   Courtesy of NISSAN MOTOR CO., U.S.A.

   Refer to "WIRING DIAGRAM - KEYLES - ".

Does horn sound? 

• Yes: Replace smart entrance control unit.
• No: Check harness for open or short between smart entrance control unit and horn relay.