LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2005 >> Sentra SE-R >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System - DTCS P0340 To P1128 (Qr25DE) >> DTC P0550: PSP Sensor >> Component Inspection >> Power Steering Pressure Sensor

Power Steering Pressure Sensor

  1. Reconnect all harness connectors disconnected.
  2. Start engine and let it idle.
  3. Check voltage between ECM terminal 12 and ground under the following conditions.
    Fig 1: Checking Voltage Between ECM Connector Terminal 12 And Ground
    G02451280Courtesy of NISSAN MOTOR CO., U.S.A.
    POWER STEERING PRESSURE SENSOR: VOLTAGE SPECIFICATIONS

    Condition Voltage
    Steering wheel is being turned. 0.5 - 4.5V
    Steering wheel is not being turned. 0.4 - 0.8V
scientia non olet · About LEMON Manuals