Diagnostic Procedure

1. Turn ignition switch OFF.
2. Loosen and retighten two ground screws on the body. Refer to GROUND INSPECTION .
   Fig 1: Locating Ground Screws

   Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

• OK : GO TO 2.
• NG : Repair or replace ground connections.

Refer to "COMPONENT INSPECTION ".

OK or NG 

• OK : GO TO 3.
• NG : Replace mass air flow sensor (with intake air temperature sensor).

Perform "TROUBLE DIAGNOSIS FOR INTERMITTENT INCIDENT ".

• : INSPECTION END