| None of the power windows can be operated using any switch |
1. BCM power supply and ground circuit check |
| 2. Main power window and door lock/unlock supply and ground circuit check |
| 3. Power window serial link check |
| Front power window LH alone does not operate |
1. Front power window motor LH circuit check |
| 2. Replace main power window and door lock/unlock switch |
| Front power window RH alone does not operate |
1. Power window and door lock/unlock switch RH power and ground circuit check |
| 2. Power window serial link check |
| 3. Front power window motor RH circuit check |
| 4. Replace BCM |
| Rear power vent window LH alone does not operate |
1. Rear power vent window motor LH circuit check |
| Rear power vent window RH alone does not operate |
1. Rear power vent window motor RH circuit check |
| Anti-pinch system does not operate normally (Front LH) |
1. Door window sliding part malfunction
- A foreign material adheres to window glass or glass run rubber.
- Glass run rubber wear or deformation.
- Sash is tilted too much, or not enough.
|
| 2. Limit switch adjusting |
| 3. Limit switch circuit check LH |
| 4. Encoder circuit check LH |
| Anti-pinch system does not operate normally (Front RH) |
1. Door window sliding part malfunction
- A foreign material adheres to window glass or glass run rubber.
- Glass run rubber wear or deformation.
- Sash is tilted too much, or not enough.
|
| 2. Limit switch adjusting |
| 3. Limit switch circuit check RH |
| 4. Encoder circuit check RH |
| Power window retained power operation does not operate properly |
1. Check the retained power operation mode setting. |
| 2. Door switch check |
| 3. Replace BCM. |
| Does not operate by front door lock assembly LH (key cylinder switch) |
1. Front door lock assembly LH (key cylinder switch) check |
| 2. Replace main power window and door lock/unlock switch |
| Power window lock switch does not function |
1. Power window lock switch circuit check |