LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2005 >> Murano SL, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> DTC P1226: TP Sensor >> DIAGNOSTIC TROUBLE CODES Confirmation Procedure >> With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Turn ignition switch OFF, wait at least 10 seconds.
  4. Turn ignition switch ON.
  5. Repeat step  3 and step  4 for 32 times.
  6. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE 
    Fig 1: CONSULT-II Data Monitor Screen
    G02466575Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals