LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2005 >> Murano SL, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> DTC P0453: EVAP Control System Pressure Sensor >> DIAGNOSTIC TROUBLE CODES Confirmation Procedure >> With GST

With GST

  1. Start engine and warm it up to normal operating temperature.
  2. Check that voltage between ECM terminal 107 (Fuel tank temperature sensor signal) and ground is less than 4.2V.
  3. Turn ignition switch OFF and wait at least 10 seconds.
  4. Turn ignition switch ON and wait at least 10 seconds.
  5. Select Service $07 with GST.

    If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE 

Fig 1: Checking Voltage Between ECM Terminal & Ground
G02466374Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals