LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2005 >> Maxima SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 308 (Transfer Case) >> Trouble Diagnosis >> Transfer Control Unit Input/Output Signal Reference Values >> Transfer Control Unit Inspection Table >> Specifications Between Transfer Control Unit Terminals

Specifications Between Transfer Control Unit Terminals

WARNING: This page is about a different car, the 2005 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Transfer Control Unit Terminal Connector Layout
G02444542Courtesy of NISSAN MOTOR CO., U.S.A.
NOTE: Data are reference value and are measured between each terminal and ground.
Fig 2: Transfer Control Unit Terminals Reference Chart (1 Of 4)
G02444543Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 3: Transfer Control Unit Terminals Reference Chart (2 Of 4)
G02444544Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 4: Transfer Control Unit Terminals Reference Chart (3 Of 4)
G02444545Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 5: Transfer Control Unit Terminals Reference Chart (4 Of 4)
G02444546Courtesy of NISSAN MOTOR CO., U.S.A.
CAUTION: When using a circuit tester to measure voltage for inspection, be sure not to extend forcibly any connector terminals.