Component Inspection

WARNING: This page is about a different car, the 2005 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch "OFF". (Stay for at least 5 seconds.)
Disconnect wait detection switch harness connector.
Remove wait detection switch. Refer to "LOCATION OF ELECTRICAL PARTS ".
Push and release wait detection switch and check continuity between wait detection switch terminals 10 and 11.

Fig 1: Wait Detection Switch Terminals 10 And 11 Continuity Specifications
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Checking Continuity Between Wait Detection Switch Terminals 10 And 11
Courtesy of NISSAN MOTOR CO., U.S.A.
If NG, replace the wait detection switch. Refer to "LOCATION OF ELECTRICAL PARTS ".