LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2005 >> Armada SE, RWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belts >> Precautions >> Precautions For Seat Belt Service >> Notes

Precautions For Seat Belt Service: Notes

CAUTION:
  • Before removing the seat belt pre-tensioner assembly, turn the ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. 
  • After replacing or reinstalling seat belt pre-tensioner assembly, or reconnecting seat belt pre-tensioner assembly connector, ensure entire SRS operates properly. Refer to  SRS OPERATION CHECK  . 
  • Do not disassemble buckle or seat belt assembly. 
  • Do not reuse seat belt anchor bolts after removal. Replace with new ones. 
  • Replace anchor bolts if they are deformed or worn out. 
  • Never oil tongue and buckle. 
  • If any component of seat belt assembly is questionable, do not repair. Replace the whole seat belt assembly. 
  • If webbing is cut, frayed, or damaged, replace seat belt assembly. 
  • When replacing seat belt assembly, use a genuine NISSAN seat belt assembly.