LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2005 >> 350Z 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> DTC P0506: ISC System >> DIAGNOSTIC TROUBLE CODES Confirmation Procedure >> With Consult-II

With Consult-II

  1. Open engine hood.
  2. Start engine and warm it up to normal operating temperature.
  3. Turn ignition switch OFF and wait at least 10 seconds.
  4. Turn ignition switch ON again and select "DATA MONITOR" mode with CONSULT-II.
  5. Start engine and run it for at least 1 minute at idle speed.
  6. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE "
    Fig 1: Scan Tool Display "Data Monitor"
    G02401735Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals