LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Xterra SE, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - VG33E >> DTC P1464: Fuel Level Sensor >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Wait at least 5 seconds.
  4. If 1st trip DTC is detected, go to Diagnostic Procedure  .
    Fig 1: Identifying Display - Data Monitor
    G00870791Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals