LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Titan SE, 4D Pickup, 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Shift Interlock System >> Shift Control System >> Adjustment Of A/T Position

Adjustment Of A/T Position

  1. Loosen nut of control cable.
  2. Place PNP switch and selector lever in "P" position.
  3. After pushing the control cable in the direction shown with a force of 9.8 N.m (1 kg-m, 2.2 lb-ft), release it. This is in the natural state, tighten control cable nut to specifications.
  1. Control cable nut : 14.5 N.m (1.5 kg-m, 11 ft-lb) 
    Fig 1: Pushing The Control Cable
    G00726742Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals