Ignition Signal: Wiring Diagram

For complete wiring diagrams, see SYSTEM WIRING DIAGRAMS - TITAN article.

Fig 1: Ignition Signal Circuit Diagram - EC-IGNSYS-01 (1 Of 3)

Courtesy of NISSAN MOTOR CO., U.S.A.

Specification data are reference values and are measured between each terminal and ground.

CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECM's transistor. Use a ground other than ECM terminals, such as the ground.

Fig 2: Specification Data (1 Of 3)

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: Ignition Signal Circuit Diagram - EC-IGNSYS-02 (2 Of 3)

Courtesy of NISSAN MOTOR CO., U.S.A.

Specification data are reference values and are measured between each terminal and ground.

Pulse signal is measured by CONSULT-II.

CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECM's transistor. Use a ground other than ECM terminals, such as the ground.

Fig 4: Specification Data (2 Of 3)

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 5: Ignition Signal Circuit Diagram - EC-IGNSYS-03 (3 Of 3)

Courtesy of NISSAN MOTOR CO., U.S.A.

Specification data are reference values and are measured between each terminal and ground. Pulse signal is measured by CONSULT-II.

CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECM's transistor. Use a ground other than ECM terminals, such as the ground.

Fig 6: Specification Data (3 Of 3)

Courtesy of NISSAN MOTOR CO., U.S.A.