LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Titan SE, 4D Pickup, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Diagnostic Procedures >> Basic Service Procedure >> Idle Speed And Ignition Timing Check >> Ignition Timing >> Method B

Method B

  1. Remove No. 1 ignition coil.
    Fig 1: Locating No. 1 Ignition Coil
    G00342541Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Connect No. 1 ignition coil and No. 1 spark plug with suitable high-tension wire as shown, and attach timing light clamp to this wire.
    Fig 2: Connecting Timing Light To No. 1 Ignition Coil And No. 1 Spark Plug
    G00342542Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 3: Suitable High-Tension Wire
    G00342543Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Check ignition timing.
    Fig 4: Checking Ignition Timing
    G00342544Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals