ECM Inspection Table

Specification data are reference values and are measured between each terminal and ground. Pulse signal is measured by CONSULT-II.

CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECMs transistor. Use a ground other than ECM terminals, such as the ground.

Fig 1: ECM Pin Voltage Chart (1 Of 8)

G00342631

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: ECM Pin Voltage Chart (2 Of 8)

G00342632

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: ECM Pin Voltage Chart (3 Of 8)

G00342633

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 4: ECM Pin Voltage Chart (4 Of 8)

G00342634

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 5: ECM Pin Voltage Chart (5 Of 8)

G00342635

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 6: ECM Pin Voltage Chart (6 Of 8)

G00342636

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 7: ECM Pin Voltage Chart (7 Of 8)

G00342637

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 8: ECM Pin Voltage Chart (8 Of 8)

G00342638

Courtesy of NISSAN MOTOR CO., U.S.A.