Testing Condition

Before performing the following procedure, confirm that battery voltage is more than 11V when engine is running. 

WITH CONSULT-II 

1. Turn ignition switch ON and wait at least 2 seconds.
2. Select "DATA MONITOR" mode with CONSULT-II.
3. Start engine and let it idle for 5 seconds.
4. If DTC is detected, go to DIAGNOSTIC PROCEDURE  .
   Fig 1: CONSULT-II Display

   Courtesy of NISSAN MOTOR CO., U.S.A.

WITH GST 

Follow the procedure "WITH CONSULT-II" above.