Inspection After Installation
- Check that the accelerator pedal moves smoothly within the specified range.
Non-adjustable accelerator pedal-total pedal applied stroke : 48 mm (1.89 in)
- Depress and release the accelerator pedal to check that it returns smoothly to the original released position.
- Perform an electrical inspection of the accelerator pedal position sensor. Refer to DTC P2138 APP SENSOR in ENGINE CONTROL SYSTEM - Titan article.
CAUTION:
When the harness connector of the accelerator pedal position sensor is disconnected, perform "Accelerator Pedal Released Position Learning"
. Refer to ACCELERATOR PEDAL RELEASED POSITION LEARNING
in BASIC DIAGNOSTIC PROCEDURES - TITAN article.