Removal And Installation Of BCM: Removal

NOTE: If possible, before removing BCM, retrieve current BCM configuration to use for reference when configuring brand-new BCM after installation. Refer to CONFIGURATION  .

1. Disconnect negative battery cable.
2. Remove instrument panel storage bin. Refer to INSTRUMENT PANEL REMOVAL AND INSTALLATION .
3. Remove instrument lower panel LH. Refer to INSTRUMENT PANEL REMOVAL AND INSTALLATION .
4. Disconnect switch assembly.
5. Remove screw and release BCM.
6. Disconnect connectors and then remove BCM.

Fig 1: Locating BCM

Courtesy of NISSAN MOTOR CO., U.S.A.