LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Titan SE, 4D Pickup, 4WD >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Module >> BCM (Body Control Module) >> Can Communication Inspection Using Consult-II (Self-Diagnosis) >> 1. Self-Diagnostic Result Check

1. Self-Diagnostic Result Check

NOTE: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.
  1. Connect to CONSULT-II, and select "BCM" on "SELECT SYSTEM" screen.
  2. Select "BCM control unit" on "SELECT WORK ITEM" screen, and select "SELF-DIAG RESULTS".
  3. Check display content in self-diagnostic results.
Fig 1: Self-Diagnostic Results On CONSULT-II
G00331671Courtesy of NISSAN MOTOR CO., U.S.A.

Contents displayed 

No malfunction >> Inspection End

Malfunction in CAN communication system >> GO TO 2.

scientia non olet · About LEMON Manuals