Overall Function Check

WARNING: This page is about a different variant/trim than selected.

Use this procedure to check the overall function of the park/neutral position switch circuit. During this check, a 1st trip DTC might not be confirmed.

WITHOUT CONSULT-II

Turn ignition switch ON.
Check voltage between ECM terminal 102 (PNP switch signal) and ground under the following conditions.

Fig 1: ECM Terminal 102 (PNP Switch Signal) And Ground Voltage Conditions Chart
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Checking Voltage Between ECM Terminal 102 (PNP Switch Signal) And Ground
Courtesy of NISSAN MOTOR CO., U.S.A.
If NG, go to DIAGNOSTIC PROCEDURE .